Live Sound

LP7800

12-Channel Powered Mixer

Harbinger LP7800 Powered Mixer Front

Hover cursor over image to zoom in

LP7800

12-Channel Powered Mixer

The new Harbinger LP7800 is an 800-watt, 12-channel, traditional power mixer with a full complement of built-in digital effects, graphic EQs, input pads and filters, monitor sends and routing options — ideal for anyone who needs an economical way to mix sound for their band, music room or performance venue.

Plenty of Power
With 800 watts of clean, articulate power under the hood, the LP7800 can fill your rehearsal space or any medium sized venue with pristine sound, giving you plenty of headroom for the entire band. You can drive stereo setups or split out for mains and monitors — or use as a mono bridge.

Plenty of Inputs
The LP7800 comes with 12 total input channels, including 7 dedicated XLR mic inputs with 48V Phantom power, plus stereo CD/Aux/Line In. That’s more than enough inputs for your entire band, choir, or public speakers.

Plenty of Channel Control
Fine tune all your inputs with High, Low and Mid frequency controls, plus Level trim and a -25dB pad to mitigate annoying low-end rumble. Clip indicators on the first four channels help diagnose any input issues instantly.

Plenty of Effects
Studio-grade, 24-bit DSP effects, including various reverbs, delays, flanger, choruses, and even a rotary speaker effect, allow you to add depth, shimmer and fullness to your sound — that means less outboard gear to haul around.

Plenty of EQ Control
With separate Right and Left 9-band graphic EQs, you can sculpt your tone to precisely match the room or venue. Plus, LED lights on each frequency channel allow to you easily read your settings in dark clubs or stages.

Built to Last
Rugged construction throughout means the LP7800 will provide years of reliable, uninterrupted service.

FEATURES

• 12-channel mixer versatile enough for rehearsals, gigs and jamming
• 800-watt amplifier with Stereo, Main/Monitor, and Mono Bridge power modes
• Studio-grade DSP effects with performance-ready presets
• 7 XLR inputs with 48V phantom power

• 4 XLR mic/line channels with -25 dB pad and clip indicator
• 3 XLR mic/stereo line channels
• -25dB pad and Rumble Filter on channels 1 through 4
• Dual 9-band graphic EQ with LEDs
• 3-band EQ per input
• FX Send and Aux send per input

• 5-segment LED meters per power amp channel
• Quick Parameter adjustment to dial in reverbs, delays, and chorus
• RCA Aux-In and Aux Out
• Line outputs connect powered speakers or monitors
• Rugged construction with protective corners and covering

SPECIFICATIONS

POWER AMPLIFIER (OUTPUT)

Input Channels
• Microphone Inputs: -60dBu
• Frequency Response: 20Hz-20KHz(±1dB)
• Gain: 36dB
• Line Inputs: -50dBu
• Frequency Response: 20Hz-20KHz(±0.5dB)
• Gain: 24dB

Impedance
• Microphone Input: 2.2KΩ balanced/ 1.1KΩ unbalanced
• All Other Inputs: 47KΩ unbalanced
• Tape Out: 120Ω
• All Other Outputs: 100Ω

Harbinger LP7800 Powered Mixer Back

Hover cursor over image to zoom in

POWER AMPLIFIER (OUTPUT)

Input Channels
• Microphone Inputs: -60dBu
• Frequency Response: 20Hz-20KHz(±1dB)
• Gain: 36dB
• Line Inputs: -50dBu
• Frequency Response: 20Hz-20KHz(±0.5dB)
• Gain: 24dB

Impedance
• Microphone Input: 2.2KΩ balanced/ 1.1KΩ unbalanced
• All Other Inputs: 47KΩ unbalanced
• Tape Out: 120Ω
• All Other Outputs: 100Ω

12-Channel Mixer 800W Stereo Amplifier 7 XLR Inputs with 48v Phantom Power

Equalization
• High Shelving: 10KHz ±15dB
• Mid Shelving: 2KHz ±15dB
• Low Shelving: 60Hz ±15dB
• Graphic EQ: 65Hz/125Hz/250Hz/500Hz/1KHz/2KHz/4KHz/8KHz/16KHz (±12dB)

DSP Section
• A/D and D/A Converters: YES
• DSP Resolution: 24BIT
• Type of Effects: AL3201
• Presets: YES
• Controls: encoder

Main Mix Section
• Noise (Bus noise): ≤0.5mV
• Monitor Max Out: +21dBu
• FX Sends Max Out: +21dBu
• Total Harmonic Distortion: 1%
• Signal to Noise Ratio: 90dB
• Static Power Consumption: 50W
• Power Source: 115V-50/60Hz

Harbinger LP7800 Powered Mixer

BUY NOW FROM THE FOLLOWING RETAILERS:

OWNER MANUAL